Epson L18050 Resetter is an adjustment program software designed to digitally clear the Waste Ink Pad Counter on several models of Epson printers, including the Epson L8050, L18050, L18058, and L8058.
With this software, in an emergency, you will be able to perform self-maintenance at home if your Epson printer experiences errors such as “Service Required” or “Ink Pad Full”, caused by the Waste Ink Pad Counter being full, which will render your printer unusable.
However, before you use this resetter, there are certainly things that must be considered so that the printer remains in good condition and does not become increasingly damaged.
Below, we will provide you with a guide on how to use the Epson L18050 Resetter, and we will also provide the download link for those who need this resetter.
Table of Contents
- What is the Waste Ink Pad System?
- What is an Epson L18050 Resetter?
- Printer Indicator Needs to be Reset
- How to Use Epson L18050 Resetter
- Download Epson L18050 Resetter Here
What is the Waste Ink Pad System?
The Epson L18050, like all inkjet printers, incorporates a sophisticated waste ink management system designed to handle excess ink that accumulates during normal printing operations. When your printer performs cleaning cycles, head alignment procedures, or encounters paper jams, small amounts of ink are expelled into absorbent pads located inside the printer chassis.
These waste ink pads serve as a reservoir for collecting unwanted ink, preventing it from contaminating your printer’s internal mechanisms or leaking onto your workspace. However, the printer’s firmware includes built-in counters that track how much ink has been absorbed by these pads. Once these counters reach predetermined thresholds, the printer automatically disables itself to prevent potential overflow and damage.
This safety mechanism is actually beneficial because it prevents ink from potentially damaging your printer’s electronics or creating messy spills. However, it can be inconvenient when the pads aren’t actually full but the counter has reached its limit through normal use patterns.
What is an Epson L18050 Resetter?
An Epson L18050 resetter is specialized software designed to communicate directly with your printer’s internal firmware and reset the waste ink pad counters back to zero. These tools trick the printer into believing that the waste ink pads have been replaced or cleaned, allowing normal operation to resume.
Resetter software works by establishing a connection between your computer and the printer through a USB cable. Once connected, the software can access specific memory locations within the printer’s firmware where counter values are stored. By modifying these values, the resetter effectively removes the error conditions that were preventing your printer from functioning.
The important thing to understand about resetters is that they address the software side of the waste ink pad system rather than the physical aspect. While the counters are reset, the actual ink pads inside your printer retain whatever ink they had absorbed previously. Therefore, you need to consider the time to physically replace or clean the Waste Ink Pad so that the printer remains in optimal condition.
Printer Indicator Needs to be Reset
When your Epson L18050 encounters waste ink pad counter issues, you’ll see one of several error messages displayed on the printer’s panel or your computer screen. The common message is “Ink pad full” or “A printer’s ink pad is at the end of its service life,” which indicates that the internal counters have reached their maximum values.
Another frequent error is “Service Required,” which appears when the printer determines that maintenance is needed. You might also encounter messages about contacting Epson support or taking the printer to an authorized service center. These messages can appear suddenly, even when your printer was working perfectly just moments before.
How to Use Epson L18050 Resetter
1. Before you use the Epson L18050 resetter, you should temporarily disable the antivirus. This is done to avoid any interference from the antivirus and to ensure the reset process goes smoothly. Additionally, make sure the printer is connected to the computer with the cable and not via WiFi.
2. You can download the Epson L18050 through the link below this article.
3. After the resetter file is downloaded, please extract the file. Then open the extracted folder and run the file inside it named AdjProg.exe.
4. After the reset program runs, please click SELECT and do not use the automatic port; your printer port will be detected after you connect the printer to the computer, so select that port and click OK. Then proceed by clicking on the Particular adjustment mode.
5. Select Waste Ink Pad Counter, then click OK.
6. Tick the Platen Pad Counter and Ink System Pad Counter options, then click Check, and continue by clicking Initialize. After the reset is successful, please click Finish and turn off the printer immediately, then you can turn your printer back on afterwards.
7. If the reset fails, try moving the printer’s USB cable to another port on the computer, then repeat the reset process.
Download Epson L18050 Resetter Here
Using a resetter is safe if done correctly and responsibly. The primary risk is not the software itself but the state of the physical waste ink pads. If you reset the counter multiple times without ever addressing the increasingly full pads, you are gambling with your printer’s health. The safest approach is to inspect or replace the waste ink pads before performing a software reset.
Once again, we remind you that using a resetter must be done with caution, and it is important to inspect the condition of the printer hardware beforehand. For those of you who understand this, you will be able to use the resetter to the fullest.
For those in need of the Epson L18050 Resetter, you can download it through the following link.
File Size: 2.9MB
File Type: .ZIP
OS Support: Windows 7/8/10/11 or higher
Maybe you would like other interesting articles?